Skip to product information
1 of 1


Hamboards - HST Spring kit gold Pro

Hamboards - HST Spring kit gold Pro

Regular price £29.16
Regular price Sale price £29.16
Sale Sold out
View full details

Hamboards - HST Spring kit gold Pro

Full Maintenance set

Set of Moly cams

Pair of Moly Washers

Pair of Auto tune King Pins

Pair Of Gold Springs

1 x Hex Key

Gold Springs are recommended for Classic, Pinger and Fish Hamboards.

These New Gold Springs offer 25% more restorative force as the Silver Springs (~25 pounds force) but these springs are pre-set so that they don't break-in and may not wear out. (We haven't worn-out a set yet!)
These New Black Kingpins feature 7mm of threads which eliminates "tuning". Just tighten the kingpin until it stops turning and you're tuned perfectly.
Prior to purchasing, please view this video.


This upgrade kit is ONLY for use with HST Carving Trucks.
The New Gold Springs have an extra half turn, and are slightly longer than the legacy Red (and Black) springs, so if you're replacing Red or Black springs, you must remove one of the fender washers to make room for the new longer spring.
The New Black Kingpins come with black locknuts. The old silver locknuts are too long, and may not "lock" onto the black kingpins.
While you're at it, you may want to replace your wavecams.
Clean old grease and lubricate generously with white Lithium grease while you're making this change.

Attribute Hamboards HST Original OS8
Total Weight 725g 657g (incl riser)
Baseplate Weight 260g 212g (incl riser)
Pivot Cup Wall Thickness 7.5mm 4mm
Height 86mm 86mm (incl plastic riser)
Overall Length 110mm 110mm
Baseplate Length 91mm 89mm
Baseplate Width 55mm 55mm
Center Axle Height 75mm 75mm
Hanger Length 200mm 200mm
Axle Length 268mm 280mm
Board Lean 28 degrees 28 degrees